Gyeon Jahee (2024)

FAQs

How long does it take for Gyeon to cure? ›

protect the coating against potential water spots while curing for 2-3 weeks. The coating is fully dry after 24 hours. Only after that time can the car be driven. The drying process can be accelerated if the coating is heated with infrared lamps, 10 minutes per panel.

Finally, to reduce the risk of water spots forming while the coating continues to cure (full curing takes around 24 hours to achieve), you should apply a protective topcoat of Gyeon Q²M Cure (you should also avoid washing the car with any kind of detergent for the first 7 days).

TIP: Dilute 1:1 with demineralised water to make wipe-off easier and reduce possible streaks on dark paints.

If you're about to use the product in a warm or hot climate, work in sections. TIP: Dilute the product up to your preferece, starting from 1:5 even up to 1:15.

It's SiO₂ (silica) based formula classifies it as a ceramic spray sealant, designed to add gloss and slickness on any type of vehicles - coated or not. With a durability up to 6 weeks, it is the ideal ceramic spray that can be applied after your wash routine - as a drying aid as well.

Gyeon is a brand known for its advanced ceramic coating formulas and exceptional durability. Their products provide excellent protection against UV rays, chemicals, and environmental contaminants. With Gyeon coatings, you can expect a lifespan of 2 to 5 years, depending on the specific product.

Overbake is the result of curing powder coat at too high of a combination of time and/or temperature. The film often becomes too hard and may embrittle also causing the gloss level or color to be adversely affected.

PREVENTS WATERSPOTS AND STAINS

The use of Q²M Cure immediately after the base coating application will help eliminate that risk entirely. The product is also amazing as a Quick Detailer, removing all potential streaks and residual water. It gives the paint a vivid shine, restoring the “just after coating” appearance.

Gyeon Q²M WetCoat is a very durable spray and rinse paint sealant. It's capable of withstanding several wash cycles over a number of weeks and months. Gyeon claim that WetCoat can last for up to 12 weeks in total.

Gyeon Q2 Wet Coat is a super easy to use, spray on ceramic coating that can be used on all parts of the vehicle including paintwork, glass, trims and wheels.

Can you layer Gyeon pure? ›

Q² Pure EVO stands for pure ceramic protection. It builds a very thick layer, therefore requires only this single layer to be fully functional and durable.

Once an even layer has been applied, QuickView should be allowed to cure on the surface for 5 minutes, but can even be left on for upward of 30-45 minutes; this makes it the perfect choice for those who want to coat all of their vehicle glass in one go.

A new ceramic coating application will take about 2-3 weeks to cure to its full strength. During that time, some precautions should be taken. You'll need to avoid using products that can damage the coating and always stay away from automatic touch-based car washes.

PREVENTS WATERSPOTS AND STAINS

The use of Q²M Cure immediately after the base coating application will help eliminate that risk entirely. The product is also amazing as a Quick Detailer, removing all potential streaks and residual water. It gives the paint a vivid shine, restoring the “just after coating” appearance.

Apply and even layer of Q2 Wax on the paintwork and allow it to cure for a minimum of 30 minutes before wiping off.